Fe73.5Cu1Nb3Si13.5B9非晶合金的晶化动力学

用ＤＴＡ结合ＸＲＤ了Ｆｅ７３．５Ｃｕ１Ｎｂ３Ｓｉ１３．５Ｂ９晶合金的晶化动力学。表明，该事金在５００℃时析出α－Ｆｅ（Ｓｉ）相。晶化初期激活能最小为２４２ｋＪ／ｍｏｌ，它随晶化量的增加，在ＸＣ为０．４－０．８时，呈极大值为５２０ｋＪ／ｍｏｌ。在６２４℃时析出Ｆｅ２Ｂ相。     

建立气井产能方程及计算地层压力的新方法

气井产量取决于井底流动压力，所以气井产能方程应该能够直接描述流压与产量的关系。文中基于气井二项式产能方程，提出了可以直接反映流压与产量之间关系的二元回归形式的产能方程模型。介绍了该模型的基本原理并进行了实例分析。该模型可以预测地层压力。     

Morphology and structure of poly(p-phenylene terephthalamide) crystallized from dilute organic solution

The high-temperature crystallization of poly(p-phenylene terephthalamide) (PPTA) from dilute organic solutions was achieved through the introduction of a non-solvent, or precipitating agent, at the desired crystallization temperature. The morphology and crystal structure were examined for crystals produced from PPTA polymer with two different molecular weights (M_w = 46000 and 3430 g mol⁻¹), using transmission electron microscopy. For the high-molecular-weight polymer, ribbon-like crystals were produced, while the low-molecular-weight polymer yielded small needles or platelets. In both cases, electron diffraction showed that the Northolt allomorph was obtained. For the high-molecular-weight polymer, the molecular axes were parallel to the ribbon axes in a chain-extended type structure. A hypothesis for the orientation of the low-molecular-weight PPTA in the small platelets, is also given.     

外循环型鼓泡式反应器气含率及循环液速率

对直径２８０ｍｍ、扩大直径５００ｍｍ、外循环管直径６５ｍｍ、总高２９００ｍｍ的外循环型鼓泡式反应器，在气体空塔线速Ｕｇ为０．０４－０．５５ｍ／ｓ时，用静压差法和脉冲示踪法测定了不同部位的气含率Ｅｇ，Ｅｐｇ和循环液速率ｕ１，并获得了它们的关联式：对反应段，Ｅｇ＝０．４５５６Ｕ＾０．３１９８ｇ〔Ｕｇ／（Ｕｇ＋Ｕ１）〕＾０．７３９６；对反应器扩大段，Ｅｕｇ＝０．９３８９Ｕ＾０．４４３１ｕｇ；对循环管，Ｅ     

海南福山凹陷地层可钻性及钻头选型

利用测井资料及室内实验建立的可钻性模型编制了计算机软件，用其建立了海南福山凹陷地层连续可钻性剖面，并推荐出钻头选型，和现场实钻情况相当的吻合，为钻头合理选型提供了依据。     

信集闭系统进路数学模型及进路连锁表生成判据的研究

本文对信集闻系统中的长进路，进路及进路间的敌对关系等重要概念作了精确定义，并提出了进路的数学模型以及进路连锁表的生成判据。     

脉冲等子体软X射线探测系统

研制了一种脉冲重复频率为１０Ｈｚ的激光等离子体软Ｘ射线源；设计并建立了以掠入射恒偏单色仪为基础的脉冲等离子体软Ｘ射线辐射测试系统。光源实验使用能量１０００ｍＪ（波长０．５３μｍ）的激光脉冲，聚焦在不同的金属靶上，使之离子化。这种高温等离子体产生的辐射包含了波长０．４～２０ｎｍ的软Ｘ光连续谱和迭加在其上的线谱。靶材有Ｍｇ、Ａｌ、Ｔｉ、Ｆｅ、Ｃｕ、Ｚｎ、Ｓｎ、Ｐｂ和Ｂｉ。得到了不同原子序数的靶材辐射的光谱分布特性。     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

核桃软糖的防粘结研究

主要针对核桃软糖在气温稍高、湿度较大的环境中容易粘结，造成质量下降和贮藏期缩短的现象，通过改进配方和工艺，防止和延缓核桃软糖粘结，延长了产品的贮藏时间。